Pipe Tee is a T shaped designed having two outlets at 90* to the connections up to the main line. This pipe has three female openings in a T-shaped pipe tee. The pipe tee is a short piece of pipe having a lateral outlet, these pipes are used to connect or join pipelines having the right angle with the line. Pipe Tee are used as pipe fittings, they are made with variety of materials which are available in various shapes and sizes with finishes. The materials in which these are available are stainless steel, carbon steel, cast iron, nickel, aluminum, copper, bronze, brass, rubber, polypropylene etc.
These pipe tees are wonderfully used in various commercials and industrial applications such as chemical processing, petroleum, pulp/paper, refineries’, textiles, waste management, marine, automotive, gas compression and distribution industries. For every industry there are different kinds of pipe tee like there sanitary pipe tees which are used in waste lines..
Pipe Tee Fittings manufactured by Pipe Fittings Supplier is one of the largest productions in India and exported to different countries such as UAE, Saudi Arabia, Kuwait, Qatar, Egypt, Turkey, Oman, Africa, Malaysia & many countries in USA & Europe. The company was established in 1992 with the high motive of success all around the world.
Get more information
Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such as couplings and stop the flows such as Caps. There are different types of pipe fitting used in piping. Pipe Fittings used in piping work are mainly Elbow, Tee, Reducer, Union, Coupling, Cross, Cap, Swage Nipple, Plug, Bush, Expansion Joint, Adapters, Olet (Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet), Steam Traps, Long Radius Bend, Flanges and Valve.
Buttweld Pipe Tee Production Range of Equal Tee, Unequal Tee (Reducing Tee)
Outside Diameter: Seamless Pipe Tee ( 1/2″～24″), ERW / Welded / Fabricated Pipe Tee (1/2″～48″)
Types: Equal Tees, Reducing Tees
Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
Production Grades: Stainless Steel, Alloy Steel, Duplex, High Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel
Manufacturing Standards of Pipe Tee
ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2
ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9 – Factory-Made Wrought Fittings Buttwelding
ASME B16.25 – Buttwelding Ends ASME B16.28 – ‘Wrought Steel Short Radius Elbows and Buttwelding Returns’
MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
Material Grades - Pipe Tee
Stainless Steel Tee; ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Carbon Steel Tee: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel Tee: ASTM A420 WPL3, A420 WPL6
Alloy Steel Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Tee: ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462
High Nickel Alloy Tee: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
Materials and Grade : Pipe Tee, Equal Tee, Reducing Tee
| Specification | : | ASTM A182, ASTM SA182 |
| Dimension | : | ANSI B 16.11 / BS3799 |
| Size | : | 1/2″ NB TO 4″ NB IN |
| Class | : | 3000 LBS, 6000 LBS, 9000 LBS |
| Range | : | Coupling, Plug, Socket, Bushing, Elbow, Tee, Nipple, Union,Threading Outlet, Welding Outlet, Sockt Weld Outlet. |
| Stainless Steel Socket Weld Equal Tee | : | ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L |
| Duplex Steel Socket Weld Equal Tee | : | ASTM A 182 –F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 S 31803, S 32205, S 32550, S 32750, S 32760 |
| Carbon Steel Socket Weld Equal Tee | : | ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2 |
| Alloy Steel Socket Weld Equal Tee | : | ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91. |
| Copper Alloys Socket Weld Equal Tee | : | ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) |
| High Nickel Alloy Socket Weld Equal Tee | : | ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276) |
Dimensions of Butt weld equal tee
| Nominal Pipe Size | Outside diameter at bevel |
Center-to-End | |
|---|---|---|---|
| Run (C) | Outlet(M) | ||
| 1/2″ | 21.3 | 25 | 25 |
| 3/4″ | 26.7 | 29 | 29 |
| 1″ | 33.4 | 38 | 38 |
| 1 1/4″ | 42.2 | 48 | 48 |
| 1 1/2″ | 48.3 | 57 | 57 |
| 2″ | 60.3 | 64 | 64 |
| 2 1/2″ | 73.0 | 76 | 76 |
| 3″ | 88.9 | 86 | 86 |
| 3 1/2″ | 101.6 | 95 | 95 |
| 4″ | 114.3 | 105 | 105 |
| 5″ | 141.3 | 124 | 124 |
| 6″ | 168.3 | 143 | 143 |
| 8″ | 219.1 | 178 | 178 |
| 10″ | 273.0 | 216 | 216 |
| 12″ | 323.8 | 254 | 254 |
| 14″ | 355.6 | 279 | 279 |
| 16″ | 406.4 | 305 | 305 |
| 18″ | 457.0 | 343 | 343 |
| 20″ | 508.0 | 381 | 381 |
| 22″ | 559.0 | 419 | 419 |
| 24″ | 610.0 | 432 | 432 |
EQUAL TEE SCH10 316/L Weight
Dimensions of Butt Welded Reducing Tees ASME B16.9 NPS 1/2 to 48
| NPS | O.D. D |
O.D. D1 |
Center to End C |
Center to End M |
| 3/4 - 1/2 | 26.7 | 21.3 | 29 | 29 |
| 1 - 1/2 | 33.4 | 21.3 | 38 | 38 |
| 1 - 3/4 | 33.4 | 26.7 | 38 | 38 |
| 1¼ - 1/2 | 42.2 | 21.3 | 48 | 48 |
| 1¼ - 3/4 | 42.2 | 26.7 | 48 | 48 |
| 1¼ - 1 | 42.2 | 33.4 | 48 | 48 |
| 1½ - 1/2 | 48.3 | 21.3 | 57 | 57 |
| 1½ - 3/4 | 48.3 | 26.7 | 57 | 57 |
| 1½ - 1 | 48.3 | 33.4 | 57 | 57 |
| 1½ - 1¼ | 48.3 | 42.2 | 57 | 57 |
| 2 - 3/4 | 60.3 | 26.7 | 64 | 44 |
| 2 - 1 | 60.3 | 33.4 | 64 | 51 |
| 2 - 1¼ | 60.3 | 42.2 | 64 | 57 |
| 2 - 1½ | 60.3 | 48.3 | 64 | 60 |
| 2½ - 1 | 73 | 33.4 | 76 | 57 |
| 2½ - 1¼ | 73 | 42.2 | 76 | 64 |
| 2½ - 1½ | 73 | 48.3 | 76 | 67 |
| 2½ - 2 | 73 | 60.3 | 76 | 70 |
| NPS | O.D. D |
O.D. D1 |
Center to End C |
Center to End M |
| 3 - 1¼ | 88.9 | 42.2 | 86 | 70 |
| 3 - 1½ | 88.9 | 48.3 | 86 | 73 |
| 3 - 2 | 88.9 | 60.3 | 86 | 76 |
| 3 - 2½ | 88.9 | 73 | 86 | 83 |
| 3½ - 1½ | 101.6 | 48.3 | 95 | 79 |
| 3½ - 2 | 101.6 | 60.3 | 95 | 83 |
| 3½ - 2½ | 101.6 | 73 | 95 | 89 |
| 3½ - 3 | 101.6 | 88.9 | 95 | 92 |
| 4 - 1½ | 114.3 | 48.3 | 105 | 86 |
| 4 - 2 | 114.3 | 60.3 | 105 | 89 |
| 4 - 2½ | 114.3 | 73 | 105 | 95 |
| 4 - 3 | 114.3 | 88.9 | 105 | 98 |
| 4 - 3½ | 114.3 | 101.6 | 105 | 102 |
| NPS | O.D. D |
O.D. D1 |
Center to End C |
Center to End M |
DIMENSIONAL TOLERANCES REDUCING TEES ASME B16.9
Nominal Pipe Size |
1/2 to 2½ |
3 to 3½ |
4 |
5 to 8 |
10 to 18 |
20 to 24 |
26 to 30 |
32 to 48 |
Outside Dia |
+1.6 |
1.6 |
1.6 |
+2.4 |
+4 |
+6.4 |
+6.4 |
+6.4 |
Inside Dia at End |
0.8 |
1.6 |
1.6 |
1.6 |
3.2 |
4.8 |
+6.4 |
+6.4 |
Center to End (C / M) |
2 |
2 |
2 |
2 |
2 |
2 |
3 |
5 |
Wall Thk (t) |
Not less than 87.5% of Nominal Wall Thickness |
|||||||